Motorola III - Manual (Page 38)

MAEPF-22628-O
W, X, Y, J, Z, AA 37
37 General Radio Features Operation
(cont.)
Programming the Radio’s Lists (cont.)
Programming the Call List (Trunked MTS 2000 III
Models Only)
This feature lets you use the radio’s keypad to
change the radio ID numbers assigned to the call list
used by the trunked Private Conversation™ and Call
Alert™ features.
1. To change the call list radio ID numbers, press the
right arrow key ( ) until “PROG” appears on the
display.
2. Press the key below “PROG.” The display changes
to show the types of lists (phone, call, etc.) that
can be programmed.
3. Press the key below “CALL” or “PAGE” (either
choice will access the same call list). The display
shows the first member of the call list and the
programming mode status annunciator flashes,
indicating that the radio is in the program mode.
The programming mode annunciator will continue
flashing while the radio is in the program mode.
4. To move around in the list, press either the right
( ) or the left ( ) arrow key. The right arrow key
will take you forwards to the next member of the
list; the left arrow key will take you backwards to
the previous member of the list. You can also use
the keypad to enter the desired member’s position
number (any preprogrammed location from 1
through 19) in the list to go directly to that
member.
5. When you stop on a member of the list, the display
will alternate between showing the member’s name
and radio ID number.
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
2 A B C 1 3 D E F
2 A B C 1 3 D E F
HOME