Motorola III - Manual (Page 80)

MAEPF-22628-O
F, G, I 79
79 Trunked Radio Features Operation
(cont.)
Trunked Enhanced Private Conversation™ Call
Operation
Direct Entry of the ID Number to be Called
1. To directly enter the ID number to be called, press
the right arrow key ( ) until “CALL” appears on
the display.
2. Press the key below “CALL.” The display changes
to show the last ID number transmitted or
received. You can now enter the ID number to be
called.
3. Enter the new six-digit ID number from the keypad.
On the display, the old ID number disappears and
the new digits appear as they are being entered.
The cursor flashes to indicate the location of the
next number to be entered.
Notes:
• If fewer than six digits are entered and the
PTT switch is pressed, you will hear a bad-
keypress tone and the display will show
"INVALID ENTRY". A bad-keypress tone will
also be heard if you try to enter a seventh
digit.
• Once you have started entering numbers, the
left arrow ( ) key will function as a backspace
key. Pressing this key will cause the last digit
entered to be erased, and the cursor to move
to the left. When the last digit has been
erased, an additional press of this key will
cause the last member of the preprogrammed
Private Conversation list to be displayed;
Pressing the right arrow key will show the first
member of the list.
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
1 2 A B C 3 D E F
1 3 D E F
6 MNO
8 TUV 9 W X Y
0
HOME
2 A B C
5 JKL 4 G H I
7 P R S
Note: If your radio has been so programmed, you
can press the call button for quick access to the
Private Conversation feature. This will take you
directly to the “last ID number transmitted or
received” display shown in step 2; skip to step 3.