Motorola III - Manual (Page 39)

38 General Radio Features Operation
(cont.)
MAEPF-22628-O
J, AB, Z, AC, D 38
Programming the Radio’s Lists (cont.)
6. Press the “select” key (programmable via the RSS)
to enter the number-edit mode. The display shows
the current member’s radio ID number. You can
now change numbers, using any of the numeric (0
– 9) keys. The blinking cursor indicates the position
of the next number to be added.
Note: In this mode, the left arrow key ( ) will
function as a backspace key. Pressing this key will
erase the previous digit, and the cursor will move
to the left. When the last digit on the display has
been erased, another press of this key or the right
arrow key ( ) will cause you to leave the number-
edit mode without making any changes, and
reenter this procedure at step 5.
7. To change the radio ID number, use the left arrow
key to erase the existing ID number’s digits. Then,
enter the new digits. The display shows the digits
as they are being entered; the cursor flashes to
indicate the location of the next digit to be entered.
When the maximum number of digits have been
entered, the cursor will disappear. If you try to add
any more digits, you will hear an invalid (bad)
keypress alert tone.
8. When you have finished changing the ID number,
press the select key again; the change is saved in
the radio’s memory and you are returned to step
5. The display will again alternate between showing
the member’s name and radio ID number; you can
change additional numbers from this point.
9. When you have finished making changes, press the
HOME key to exit the program mode. The radio will
return to the home display.
HOME
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME