Motorola III - Manual (Page 42)

MAEPF-22627-O(E)
MAEPF-22627-A (F, I) 41
41 General Radio Features Operation
(cont.)
Conventional Telephone Operation (cont.)
Making a Delayed Access Telephone Call Using the
Keypad (MTS 2000 III Model Only)
1. To make a delayed access call using the keypad,
press the right arrow key ( ) until “PHON”
appears on the display.
Note: If your radio has been so programmed, you
can press the phone button for quick access to the
telephone call feature. This will take you directly to
the “last number dialed” display shown in step 2;
skip to step 3.
2. Press the key below “PHON.” The display changes
to show the last telephone number dialed.
The new telephone number can now be entered
from the keypad, using any of the numeric (0 – 9)
keys, as well as the “*” and “#” keys. You can also
enter a pause in the telephone number by first
pressing the “*” key, then the “#” key. The pause
will be shown on the display as a “P.”
3. Begin entering the telephone number. The display
changes to show the numbers as they are being
entered. The cursor will flash to indicate the
location of the next number to be entered. When
the maximum number of digits have been entered,
the cursor will disappear.
Note: Once you have started entering numbers,
the left arrow key ( ) will function as a backspace
key. Pressing this key will erase the last digit
entered, and move the cursor to the left. When
the last digit on the display has been erased, an
additional press of this key will cause the last
member of the preprogrammed telephone list to be
displayed; pressing the right arrow key will show
the first member of the list.
HOME
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
1 2 A B C 3 D E F
HOME
2 A B C 1 3 D E F
6 MNO 5 JKL
8 TUV 9 W X Y
0
4 G H I
7 P R S