Marantz 5411 10470 007M - Manual (Page 16)

12
ENGLISH
Connecting a 2-channel audio amplifier
This connection is for playback of audio of this unit, using a 2-channel audio device.
For software recorded in multi-channel, an analog signal down-mixed to 2-channels is output.
Cables used for connections
Audio and Video cable
Audio and Video
cable
(Supplied)
R
L
R
L (White)
(Red)
(Yellow)
AUDIO
AUDIO
IN
L
R R R
L L
Amplifier
Connecting to a digital recording device
This connection is for recording audio from this unit, using an audio device with coaxial digital audio input
terminals.
Cables used for connections
Audio cable
Coaxial digital
cable
(Sold separately)
(Black)
AUDIO
COAXIAL
IN
Recorder
When multi-channel audio is to be converted to 2-channel audio and output, change the setting for a
connected Coaxial digital output to PCM from Bitstream, then make the setting for the sampling rate for
digital audio output, depending on the device (vpage 38 “Down Sampling”).
NOTE
If you play back BD/DVD or other media with an incorrect configuration, a deafening noise occurs that may
damage your speakers.
1.UD5005U_ENG_0930.indd 12 2010/10/04 18:00:20