Playback (advanced operation), Home menu screen, Connecting to a system control cable – Marantz 5411 10470 007M User Manual
Page 32: Opening the home menu screen
Playback (Advanced operation)
This section describes the playback of fi les stored in the DVD, CD or
USB momery device and the operation of Home menu.
Home menu screen(vpage 28)
Opening the Home menu screen (vpage 28)
Playing fi les (MEDIA PLAYER) (vpage 29)
Playing YouTube video (vpage 31)
Playing Netﬂ ix video pictures (vpage 31)
How to make detailed settings(vpage 32)
Home menu screen
The unit can play music, photos, video fi les stored in the USB memory
device connected to the front panel of the unit or on the sever
connected via the network. For playback operation, use the Home
Opening the Home menu
The Home menu is displayed on the
to move the cursor
to the menu item to be used.
The icons show the category of
content applicable to each operation.
For details of the media corresponding to each icon, see “Playable Media”
Home menu screen
MEDIA PLAYER ········································································ (29)
The unit can play music, photos, video fi les stored on the device
connected via the network or in the USB memory device connected
to the front panel of the unit.
NETFLIX ···················································································· (31)
The Netfl ix contents are played.
YouTube ··················································································· (31)
The YouTube contents are played.
The Home menu is closed.
SETUP ······················································································· (32)
The GUI menu setup screen is displayed for setting the unit.
Connecting to a system control cable
When you use this unit connected to a Marantz amplifi er, this unit
receives operation signals sent from the amplifi er and operates
Use the supplied remote connection cable to connect the REMOTE
CONTROL IN terminal of this unit to REMOTE CONTROL OUT
terminal of the amplifi er.
Set the remote control switch on the rear panel of this unit to“EXT.
(EXTERNAL)”to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote
sensor of the amplifi er.
To use this unit without connecting it to the amplifi er, set the remote
control switch to “INT. (INTERNAL)”.
Signal fl ow
Remote connector cord
Set to “EXTERNAL.”
This is used when controlling components from different rooms
with a keypad or other input device.
Set the remote switch to “INT. (INTERNAL)” when using a fl asher