Intel IXM5414E - Manual (Page 192)

182 Intel® Blade Server Ethernet Switch Module IXM5414E
clear pass
Use this command to reset all user passwords to the factory defaults. You will be prompted to
confirm that the password reset should proceed.
Format clear pass
clear stats port
Use this command to clear the statistics for a specified port. You will be prompted to confirm that
you want to issue this command.
Format clear stats port <port/listofports/all>
clear stats switch
Use this command to clear the statistics for the switch. You will be prompted to confirm that you
want to issue this command.
Format clear stats switch
clear transfer
Use this command to reset the file transfer parameters to the factory defaults. You will be prompted
to confirm that you want to issue this command.
Format clear transfer
clear traplog
Use this command to clear the trap log. You will be prompted to confirm that you want to issue this
command.
Format clear traplog
clear vlan
Use this command to reset the VLAN configuration parameters to the factory defaults. You will be
prompted to confirm that you want to issue this command.
Format clear vlan
logout
Use this command to close the current Telnet connection or reset the current serial connection. If you
have any saved configuration changes, you will be prompted to save them.
If you logout without issuing a save config command any configuration changes you have made will
be lost.
Format logout