Intel IXM5414E - Manual (Page 28)

18 Intel® Blade Server Ethernet Switch Module IXM5414E
Notes:
1. The illustrations in this document may differ slightly from your hardware.
2. An amber LED illuminates when a system error or event has occurred. To identify the error or
event, check the LEDs on the information panel of the switch module.
OK (power-on): This green LED is located above the four external 10/100/1000 Mbps ports on the
information panel. When this LED is on, it indicates that the switch module has passed the Power-
On Self-Test (POST) and is operational.
! (Ethernet switch error): This amber LED is located next to the OK (power-on) LED on the
information panel. This LED indicates that the switch module has a fault. If the switch module fails
the POST, this fault LED will be lit.
Ethernet link: This green link status LED is located at the top of each external 10/100/1000 Mbps
port. When this LED is lit on a port, it indicates that there is a connection (or link) to a device on that
port.
Ethernet activity: This green activity LED is located at the bottom of each external 10/100/1000
Mbps port. When this LED blinks on a port, it indicates that data is being received or transmitted
(that is, activity is occurring) on that port. The blink frequency is proportional to the amount of
traffic on that port.