Intel IXM5414E - Manual (Page 225)

Intel® Blade Server Ethernet Switch Module IXM5414E 215
value on each will be exhausted before the next server is attempted. A retransmit will not occur until
the configured timeout value on that server has passed without a response from the RADIUS server.
Therefore, the maximum delay in receiving a response from the RADIUS application equals the sum
of maxretransmit times timeout for all configured servers. If the RADIUS request was generated by
a user login attempt, all user interfaces will be blocked until the RADIUS application returns a
response.
Default 4
Format config radius maxretransmit <1-15>
config radius timeout
Use this command to configure the timeout value (in seconds) after which a request must be
retransmitted to the radius server if no response is received.
Consideration should be given to the maximum delay time when configuring RADIUS
maxretransmit and timeout values. If multiple RADIUS servers are configured, the maxretransmit
value on each will be exhausted before the next server is attempted. A retransmit will not occur until
the configured timeout value on that server has passed without a response from the RADIUS server.
Therefore, the maximum delay in receiving a response from the RADIUS application equals the sum
of maxretransmit times timeout for all configured servers. If the RADIUS request was generated by
a user login attempt, all user interfaces will be blocked until the RADIUS application returns a
response.
Default 5
Format config radius timeout <1-30>
show radius stats
Use this command to display RADIUS statistics for the switch that are not associated with a specific
server or accounting server.
Format show radius stats
Invalid Server Address
The number of RADIUS access response packets received from an unknown
address.
show radius summary
Use this command to display a summary of the RADIUS configuration parameters for the switch.
Format show radius summary
Current Server IP Address
The IP address of the RADIUS server currently used for authentication.
Number of Configured Servers
The number of RADIUS servers that have been configured.
Max Number of Retransmits
The maximum number of times a request packet will be retransmitted.
Timeout Duration (secs)
The timeout value, in seconds, for request retransmissions.
Accounting Mode
Indicates whether accounting is currently enabled.