Intel IXM5414E - Manual (Page 97)

Intel® Blade Server Ethernet Switch Module IXM5414E 87
File Type
Specify the type of file to be downloaded to the switch:
Code
8051 MCU Code
Config
SSH RSA1 Key File
SSH RSA2 Key PEM File
SSH DSA Key PEM File
SSL Trusted Root Certificate PEM File
SSL Server Certificate PEM File
SSL DH Weak Encryption Parameter PEM File
SSL DH Strong Encryption Parameter PEM File
8051 MCU Code
TFTP Server IP Address
Enter the IP address of the TFTP server. The factory default is 0.0.0.0.
TFTP File Path
This field specifies the directory path on the TFTP server where the file to be downloaded to
the switch is located. The switch will retain the last file path used.
TFTP File Name
This field specifies the name of the file that is to be downloaded to the switch. The switch
will remember the last file name used.
The last row of the table is used to display information about the progress of the file transfer. The
screen will refresh automatically until the file transfer completes.
The Intel® Blade Server Ethernet Switch Module IXM5414E software supports the use of a TFTP
client. The TFTP client path statement requirement is server dependent. A path statement is
generally required to setup the TFTP client; however, the client path may remain blank. See the
example of the path setup.
TFTP Upload Example:
The TFTP upload example details three scenarios for TFTP client-to-server file transfer. Each
scenario involves uploading the config.bin file from the switch to the location c:\tftp\ on the server.
The different scenarios are detailed below:
Click the Start File Transfer button to apply any changes made to the fields and initiate the
download.
Click the Apply button to send the updated screen to the switch; this does not perform the file
download.
Table 4. TFTP Upload Scenarios
TFTP Server path TFTP Client path
c:\tftp\ blank
c:\ tftp\
c: \tftp\