Intel IXM5414E - Manual (Page 198)

188 Intel® Blade Server Ethernet Switch Module IXM5414E
Generic Attribute Registration Protocol (GARP) commands
config garp gmrp adminmode
Use this command to enable or disable the GARP Multicast Registration Protocol (GMRP) on the
switch module.
Default disable
Format config garp gmrp adminmode <enable/disable>
config garp gmrp interfacemode
Use this command to enable or disable the GMRP on one, some or all interfaces. If an interface
which has GARP enabled is enabled for routing or is made a member of a LAG, GARP functionality
will be disabled on that interface. GARP functionality will subsequently be re-enabled if routing is
disabled or LAG membership is removed from an interface that previously had GARP enabled.
Default disable
Format config garp grmp interfacemode <port/listofports/all><enable/disable>
config garp gvrp adminmode
Use this command to enable or disable GVRP on the switch module.
Default disable
Format config garp gvrp adminmode <enable/disable>
config garp gvrp interfacemode
Use this command to enable or disable GVRP for one, some or all interfaces. If GVRP is disabled,
Join Time, Leave Time and LeaveAll Time have no effect.
Default disable
Format config garp gvrp interfacemode <port/listofports/all> <enable/disable>
config garp jointimer
Use this command to configure the GARP Join Time for the specified port(s). Join Time is the
interval between the transmission of GARP Protocol Data Units (PDUs) registering (or re-
registering) membership for a VLAN or multicast group.
This command has an effect only when GVRP is enabled. The time may range from 10 to 100
centiseconds.
Default 20 centiseconds (0.2 seconds)
Format config garp jointimer <port/listofports/all> <10-100>
config garp leavealltimer
Use this command to configure how frequently LeaveAll PDUs are generated for the specified
port(s). A LeaveAll PDU indicates that all registrations will be unregistered. Participants would
need to rejoin in order to maintain registration. The value applies per port and per GARP
participation. The time may range from 200 to 6000 centiseconds.
This command has an effect only when GVRP is enabled.
Default 1000 centiseconds (10 seconds)
Format config garp leavealltimer <port/listofports/all> <200-6000>