Intel SE8500HW4 - Manual (Page 108)

BIOS User Interface Intel® Server Board Set SE8500HW4
Revision 1.0
Intel order number D22893-001
96
Key Option Description
+ Change Value The plus key on the keypad is used to change the value of the current menu
item to the next value. This key scrolls through the values in the associated
pick list without displaying the full list. On 106-key Japanese keyboards, the
plus key has a different scan code than the plus key on the other keyboard, but
will have the same effect.
F9 Setup Defaults Pressing F9 causes the following to appear:
Load default configuration now? (Y/N)
If the “Y” key is pressed, all Setup fields are set to their default values. If the
“N” key is pressed, or if the ESC key is pressed, the user is returned to where
they were before F9 was pressed without affecting any existing field values
F10 Save and Exit Pressing F10 causes the following message to appear:
Save Configuration changes and exit now? (Y/N)
If the “Y” key is pressed, all changes are saved and Setup is exited. If the “N”
key is pressed, or the ESC key is pressed, the user is returned to where they
were before F10 was pressed without affecting any existing values.
11.6.3 Server Platform Formset
This section lists and describes the pages of a Server Platform Setup. Each table is displayed in
Setup as a page. The text and values in the Setup Item, Option and Help columns in the table
are also displayed in their Setup page. The Default column indicates the option value applied
when Setup is reset to default values.
Table 62. Main Menu
Setup Item Options Default Help Text Comment
Main Set general system
parameters.
Not an active link.
Processor Examine and set
system Processor
parameters.
Link to Setup
Utility\Processor
Memory Examine and set
system Memory
parameters
Link to Setup
Utility\Memory
Devices Examine and set
system parameters for
built-in Devices.
Link to Setup
Utility\Devices
Server
Management Examine and set Server
Management
parameters Link to Setup
Utility\Server
Management
Security Examine and set
security options.
Link to Setup
Utility\Security
Save, Restore
and Exit Save, restore values
and/or exit BIOS Setup.
Link to Setup
Utility\Save, Restore
and Exit