Intel SE8500HW4 - Manual (Page 109)

Intel® Server Board Set SE8500HW4 BIOS User Interface
Revision 1.0
Intel order number D22893-001
97
Table 63. Time and Date Menu
Setup Item Options Default Help Text Comment
BIOS
Version N/A N/A N/A Displays the current the
BIOS version (excluding the
build time and date). as per
description in Section titled -
BIOS Identification String.
System Date [DD/MM/YYYY
] N/A Month valid values are 1 to 12.
Day valid values are 1 to 31.
Year valid values are 1998 to
2099.
Help text depends on the
subfield selected (Month,
Day, or Year).
System Time [HH:MM:SS] N/A Hours valid values are 0 to 23.
Minutes valid values are 0 to 59.
Seconds valid values are 0 to 59.
Help text depends on the
subfield selected (Hours,
Minutes, Seconds).
Quiet Boot
Enable Enabled/
Disabled Enabled If enabled no messages will be
displayed on the screen while the
system POSTs. System will
POST with the logo displayed.
POST Error
Pause Enabled/
Disabled Enabled If enabled, the system will wait
for user intervention on critical
POST errors. If disabled, the
system will boot with no
intervention, if possible.
Table 64. Processor Menu
Setup Item Options Default Help Text Comment
Core
Frequency Current
Processor
Core
running
frequency. Frequency at which processors
currently run. Info Only
Bus Frequency Current bus
frequency. Auto Current frequency of the
processor Front Side Bus. Info Only
Processor
Retest Enabled/
Disabled Disabled If enabled, retest all processors
in the system during the next
POST. Executes only once and then
automatically resets to disabled.
Intel® Hyper-
Threading
Enable Enabled/
Disabled Enabled Enables the Intel® Hyper-
Threading feature, takes effect
after reboot.
Boot
Processor
Number Processor
#<the BSP
number) Number of the processor that
is designated by the firmware
to boot this system. Info Only
Processor
#<processor
number>
Information Processor Detailed
Information.
Info Only.
Link to Processor #<processor
number> screen (one per processor
supported by the platform).