Intel SE8500HW4 - Manual (Page 121)

Intel® Server Board Set SE8500HW4 BIOS User Interface
Revision 1.0
Intel order number D22893-001
109
Table 85. FRB Information Menu
Setup Item Option Default Help Text Comment
Processor
#<processor
number>
Information Processor Detailed
Information.
Link to Setup
Utility\Processor\Proces
sor #<processor
number> Information,
one per processor
supported by the
platform
FRB-2 Enable Enabled/
Disabled Enabled If enabled, the BMC will
reset the system if the
BIOS does not
complete the Power On
Self Test before the
FRB-2 timer expires.
OS WD Timer
Enable Enabled/
Disabled Disabled If enabled, the timer
starts when the system
begins to boot an
Operating System. If the
timer expires before the
Operating System boot
completes the system
will reset by the BMC.
OS WD Timer 5 minutes/
10 minutes/
15 minutes/
20 minutes
10 minutes This sets the time that
the system has to boot
an Operating System. This option is grayed
out if the “OS WD Timer
Enable option” is not
selected.
Table 86. Security Menu
Setup Item Option Default Help Text Comment
Administrator
Password is Installed/Not
Installed Not Installed Indicates the status of
administrator password. Info Only, Disabled if
the password is blank,
Active otherwise
Set
Administrator
Password The administrator
password controls
access to platform
configuration.
The password is not
displayed
User Password
is Installed/Not
Installed Not Installed Indicates the status of
user password. Info Only, Disabled if
the password is blank,
Active otherwise
Set User
Password The user password
controls access to the
system at boot.
Password on
Boot Enabled/
Disabled Disabled If enabled, password
entry is required before
boot.