Integra DPS-10.5 - Manual (Page 16)

16
Getting to Know the DPS-10.5
For detailed information, refer to the pages in parenthesis.
A Standby indicator (38)
The Standby indicator lights up when the DPS-10.5
is set to Standby.
B Standby/On button (38)
This button is used to set the DPS-10.5 to On or
Standby.
C Display
See “Display” on page 17 for more information.
D Remote control sensor (15)
This sensor receives control signals from the remote
controller.
E Display button (59)
This button is used to display information about the
disc, title, chapter, group, or track, including the
elapsed time, remaining time, total time, and so on.
F Previous [ ] button (44, 45, 48)
This button is used to select the previous chapter or
track. During playback it selects the beginning of
the current chapter or track.
G Next [ ] button (44, 45, 48)
This button is used to select the next chapter or
track.
H Video Circuit Off button & indicator (62)
This button is used to turn off all of the internal
video circuitry, eliminating the possibility of inter-
ference when playing audio-only discs. The Off
indicator lights up when the video circuitry is turned
off.
I Video Input button (62)
This button is used to select the video input source:
DVD (the DPS-10.5) or External (S-Video input or
composite video input).
J DVD & External indicators (62)
These indicators show the currently selected video
input source: DVD or External.
K Disc tray (41)
Discs are loaded onto the disc tray.
L Open/Close button (41)
This button is used to open and close the disc tray.
M Stop button (42)
This button is used to stop playback.
N Play button (42)
This button is used to start playback.
Front Panel
B 1 C D E F G
H L M N K J I