Integra DPS-10.5 - Manual (Page 24)

24
Connecting —Continued
The DPS-10.5 supports several video input formats. The following table shows what’s output by each video output when
each of the video inputs is selected. It also shows whether or not the video is upconverted to progressive video.
Audio
i.LINK
i.LINK (IEEE 1394) connections can carry up
to six (5.1) channels and up to 24-bit/
192 kHz digital audio, and can be used for
multichannel digital audio (DVD-Video,
DVD-Audio, SACD) and stereo digital audio
(VCD, CD, MP3).
Optical digital
Optical digital audio connections can carry
Dolby Digital or DTS multichannel digital
audio
(DVD-Video, DVD-Audio ) or stereo
digital audio (DVD-Video, DVD-Audio,
SACD, VCD, CD, MP3)
.
Coaxial digital
Coaxial digital audio connections can carry
Dolby Digital or DTS multichannel digital
audio
(DVD-Video, DVD-Audio ) or stereo
digital audio (DVD-Video, DVD-Audio,
SACD, VCD, CD, MP3)
.
Analog
RCA analog audio connectors can be found on
virtually all AV components.
Multichannel
analog audio
cable (RCA)
This cable carries multichannel analog audio
and it’s typically used to connect DVD players
with individual 5.1/7.1-channel analog audio
outputs. Several standard analog audio cables
can be used instead of a multichannel cable.
Video Formats & DPS-10.5 Inputs & Outputs
Selected video input
DPS-10.5 video output
HDMI OUT a
a. Only works with components that support HDCP (High-bandwidth Digital Content Protection).
HD VIDEO OUT
COMPONENT COMPONENT
VIDEO OUT S VIDEO VIDEO
OUT VIDEO VIDEO
OUT
DVD (i.e., DPS-10.5) DVD b
DVD
(progressive)
DVD (interlaced)
External
S VIDEO VIDEO IN External b
b. Resolutions supported by the connected TV can be selected by pressing the [Resolution] button (see page 62).
External
(progressive)
VIDEO VIDEO IN External b
External
(progressive)
OPTICAL
COAXIAL
L
R
FRONT SURR 1 CENTER SURR 2
L
R
SUB
WOOFER