Integra DPS-10.5 - Manual (Page 33)

33
Connecting —Continued
Notes:
• Dolby Digital, DTS, DVD-Audio, and SACD can also
be fully enjoyed by using i.LINK (page 31).
• In addition to a digital connection, it’s recommended
that you also connect the D.MIX AUDIO OUT to a
spare analog audio input on your AV receiver, as this
will allow you to record audio to a cassette recorder or
CD recorder. If your AV receiver supports Zone 2, you
must make an analog audio connection in order to
select the DPS-10.5 as the input source for Zone 2.
• Make sure that the digital output (Digital 1 Out or Dig-
ital 2 Out) is set to Dolby Digital (see page 70). Oth-
erwise you won’t get surround sound. Likewise for
DTS (see page 70).
• When playing Dolby Digital or DTS soundtracks, be
sure to select Dolby Digital or DTS decoding, respec-
tively, on your AV receiver. Refer to your AV
receiver’s manual.
K. Analog Audio Connection
(Dolby Digital, DTS, DVD-Audio &
SACD)
To fully enjoy the multichannel audio of DVD-Audio
and SACD, you need to connect the DPS-10.5’s 5.1-
channel analog audio output to a multichannel analog
audio input on an AV receiver. Dolby Digital and DTS
soundtracks can also be fully enjoyed with this type of
connection.
Use a multichannel analog audio cable (RCA) to connect
the DPS-10.5’s FRONT, SURR 1, CENTER, and SUB-
WOOFER AUDIO OUTs to a 5.1-channel analog audio
input on the AV receiver. (You can use several separate
RCA audio cables instead of a multichannel cable.) Set
the SURR MODE (AUDIO OUT) switch to 1.
If your AV receiver supports 7.1-channels and you’re
using back surround speakers, connect the DPS-10.5’s
SURR 2 AUDIO OUTs to the receiver’s surround back
left and right inputs as well, and set the DPS-10.5’s
SURR MODE (AUDIO OUT) switch to 1+2.
Notes:
• Refer to the hookup information supplied with your
AV receiver.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
• DVD-Video discs may contain Dolby Digital and DTS
soundtracks. The Dolby Digital soundtrack will be
selected by default. To play the DTS soundtrack, use
the movie’s main menu and look under Language or
Audio Setup. Alternatively, use the remote controller’s
[Audio] button (see page 58).
• See the table on page 25 for details on how the
DPS-10.5’s audio outputs handle Dolby Digital, DTS,
DVD-Audio, and SACD.
R L
FRONT
SUB
SURR
CENTER
FRONT SURR 1 CENTER SURR 2
L
R
SUB
WOOFER
AUDIO OUT
Signal flow
AV receiver