Invacare Solara Jr. 1106628 - Manual (Page 34)

Solara jr.™ 34 Part No. 1106628
BACK/SEAT PROCEDURE 6
BACK/SEAT
BACK
LOCKED
SECURELY
Back
Release
Latch
Back
Cane
FIGURE 1 - FOLDING/UNFOLDING BACK ASSEMBLY
FRONT OF
WHEELCHAIR
INSTALLING/REMOVING STROLLER HANDLES (FIGURE 2)
INSTALLING
1. Remove the plug buttons from both back
canes, if necessary.
2. Slide the stroller handle into the back canes.
3. Align the mounting holes of the stroller
handle and the back canes.
4. Press the button on the quick release pin
and insert the quick release pin through the
back cane and stroller handle.
5. Release the button on the quick release pin.
6. Pull on the stroller handle to make sure it is
locked securely in place.
FIGURE 2 - INSTALLING/
REMOVING STROLLER HANDLES
Quick-Release Pin
Back Cane
Stroller Handle
Button
Mounting Holes
This Procedure Includes the Following:
Folding/Unfolding Back Assembly
Installing/Removing Stroller Handles
Installing/Removing/Adjusting the Adjustable Angle Stroller Handles
Using the Telescoping Back Canes
Installing/Replacing the Back Upholstery
Installing/Removing a Seating System
Removing/Installing the Spreader Bar
Installing the Seat Cushion
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attach-
ing hardware is tightened securely - otherwise injury or damage may result.
FOLDING/UNFOLDING BACK ASSEMBLY (FIGURE 1)
WARNING
The back MUST be locked securely in place BEFORE using the wheelchair.
1. Do one (1) of the following:
A. UNFOLD - Push/pull the back towards rear of wheelchair until it locks in place.
B. FOLD - Pull up on the back release latches and push the back towards the front of
the wheelchair.