Adjusting forks (figure 3) – Invacare Solara Jr. 1106628 User Manual

Page 43

Advertising
background image

Part No. 1106628

43

Solara jr.™

WHEELS/FORKS

PROCEDURE 7

WHEELS/FORKS

FIGURE 3 - ADJUSTING FORKS

ADJUSTING FORKS (FIGURE 3)

1. Remove the dust cover from the caster headtube.
2. To properly tighten caster journal system and guard against flutter, perform the following

check:
A. Tip back the wheelchair to floor.
B. Pivot both forks and casters to top of their arc simultaneously.
C. Let casters drop to bottom of arc (wheels should swing once to one-side, then

immediately rest in a straight downward position).

D. Adjust locknuts according to freedom of caster swing.

3. Test wheelchair for maneuverability.
4. Readjust locknuts if necessary, and repeat STEPS 1-3 until correct.
5. Snap dust cover into the caster headtube.
6. Repeat STEPS 1-5 for opposite side, if necessary.

Dust Cover

Caster

Headtube

TOP VIEW

Locknut

Fork

Advertising