Invacare Solara Jr. 1106628 - Manual (Page 7)

Part No. 1106628 7 Solara jr.™
SPECIFICATIONS
PHYSICAL DIMENSIONS
INVACARE SOLARA JR.
Overall Width: Seat Width + 8-1/4-inches (Example: 16-inch Wide Wheelchair =
24-1/4-inches Overall Width)
Overall Depth: 26-1/4-inches
(W/O Front Riggings)
Overall Height:
* Seat-to-Floor Height + 20-inches (20-inch back canes)
* Seat-to-Floor Height + 24-inches (24-inch back canes)
Anti-Tippers: Standard
Footrest: Swing-Away Footrest - 90° (Standard) or 70°,
Elevating Legrests, Bilateral Contracture Footrests
Armrests: Dual Point Arms - Desk or Full Length, Adjustable or Fixed Height
Cantilever Arms - Bolt or Clamp-on, Desk or Full Length
T-Arms - Desk or Full Length, Adjustable Height
Seat Pan: Black Steel - Flush Mounted (Standard), Drop Mounted (Optional)
Back: Adjustable Height Swivel Canes - 20 to 24-inches or 24 to 28-inches
Fixed - 20 or 24-inches
Reclining - 20 or 24-inches
Back Angle Adjustment: 90° to 120° (10° increments)
Rear Axle: Quick-Release (Standard)
Rear Wheels: 12-inches Pneumatic (Standard)
12-inch Pneumatic w/flat free (Optional)
16, 18, 20, 22 and 24-inch Pneumatic, Urethane or Pneumatic w/flat
free (Optional)
Handrims: Aluminum Handrims (20, 22 and 24-inch)
Caster Size: 6 x 2-inch w/ Precision Sealed Bearings (Optional)
8-inch w/ Precision Sealed Bearings (Optional)
6 x 1-inch w/ Precision Sealed Bearings (Standard)
Seat Width: 10 to 16-inches
(Growable from 10 to 13-inches wide or from 13 to 16-inches wide)
Seat Depth: 12 to 18-inches
Back Cane Height: 20 and 24-inches
Wheel Locks: 12-inch Rear Wheels - Attendant Operated
16, 18, 20, 22, and 24-inch Rear Wheels - Pull to Lock
Tilt-In-Space: Dual Cable Trigger Mechanism (Standard) - 50° of Tilt
Recliner Back: Dual Cable Trigger Mechanism (Optional) 90 - 180° of Tilt
Frame: Aluminum
SPECIFICATIONS
* NOTE: The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free
inserts. If wheelchair is equipped with urethane tires, subtract 1/4-inch from the measurements listed
above. All heights are measured with properly inflated new tires. These heights can vary +1/4-inch due
to tire wear.
SPECIFICATIONS