Invacare Solara Jr. 1106628 - Manual (Page 54)

Solara jr.™ 54 Part No. 1106628
PROCEDURE 10 CONTRACTURE FOOTPLATE
CONTRACTURE
FOOTPLATE
This Procedure Includes the Following:
Contracture Assembly Angle Adjustment
Using The Optional Quick Release Pin
Angle Adjustment of the Contracture Footplate
Contracture Footplate Depth Adjustment
Contracture Footplate Height Adjustment
Replacing The Contracture Footplate Heel Loop
CONTRACTURE ASSEMBLY ANGLE ADJUSTMENT
(FIGURE 1)
1. Remove the mounting screw and locknut used to lock the angle adjustment of the contrac-
ture assembly.
2. Lift the contracture support UP/DOWN to achieve the desired angle.
3. Align the mounting hole in the contracture support with one (1) of seven (7) mounting holes on
the angle adjustment bracket.
4. Reinstall the mounting screw and locknut used to lock the angle adjustment of the contrac-
ture assembly. Securely tighten.
5. If necessary repeat STEPS 1-4 on remaining contracture assembly.
FIGURE 1 - CONTRACTURE ASSEMBLY ANGLE ADJUSTMENT
Angle
Adjustment
Bracket
Mounting
Holes
Locknut
Contracture Support
Mounting Screw