Installing and removing a seating system, Removing/installing the spreader bar (figure 8) – Invacare Solara Jr. 1106628 User Manual

Page 39

Advertising
background image

Part No. 1106628

39

Solara jr.™

INSTALLING AND REMOVING A SEATING SYSTEM

WARNING

DO NOT use parts, accessories, or adapters other than those authorized by

Invacare. Otherwise, the warranty is void.

1. Ensure that the seating system is compatible with this wheelchair.
2. Refer to the seating system Owner's Manual for installation and removal.

BACK/SEAT

PROCEDURE 6

BACK/SEAT

REMOVING/INSTALLING THE SPREADER BAR (FIGURE 8)

REMOVING

1. Loosen, but DO NOT remove the set screw on each spreader bar clamp.
2. Remove the spreader bar from the back canes.

INSTALLING

1. If necessary, loosen, but do not remove the set screw on each spreader bar clamp.
2. Place the spreader bar clamps flush against the back canes.
NOTE: When positioning the clamps flush against the back canes, ensure the spreader bar is parallel to

the ground/floor.
3. Tighten the set screw on each spreader bar clamp to secure the spreader bar to the back

canes.

Spreader Bar

Set Screw

Clamp

Clamp

Back Canes

FIGURE 8 - REMOVING/INSTALLING THE SPREADER BAR

Advertising