IBM HANDBOOK 260 - Manual (Page 131)

Storage Architectures and Devices 113
used to attach an external SCSI device to a SCSI adapter card in an RS/6000
system.
Table 22. 16-Bit SCSI-II System-To-System Cable
Terminators for Use with These Adapters
Table 23 describes the terminators for single-ended installations.
Table 23. Terminators for Single-Ended Installations
4.3.3 Cabling the PCI Differential-Ended Ultra SCSI Adapter
To understand the cabling for the PCI differential-ended Ultra SCSI adapter (#
6207), first read 4.3.1, “General SCSI Cabling Considerations” on page 106
and then read the following for specific information.
SCSI Differential Cable Lengths Using This Adapter
The maximum supported cable length for configurations is 25 meters
(approximately 80 feet).
Machine
Type FC Length
(meters0 Cable Description
SE External
Devices 2424 0.6 16-bit SCSI-II system-to-system cable
SE External
Devices 2425 2.5 16-bit SCSI-II system-to-system cable
M/T FC Part Number Connector Terminator
Description
SE External
Devices Part of cable
FC 52G4260 50-pin low
density 8-bit external FPT18C
terminator
SE External
Devices Part of cable
FC 92F0432
(52G9907) 68-pin high
density 16-bit external Boulay
terminator
SE External
Devices Part of cable
FC 92F0322
(92G2566) 68-pin high
density 16-bit external bus
terminator