IBM HANDBOOK 260 - Manual (Page 202)

184 RS/6000 43P 7043 Models 150 and 260 Handbook
6.7.5 SMS Firmware Checkpoints
Firmware Checkpoints are intended to let users and service personal know
what the system is doing, in some detail, as it initializes. These checkpoints
occur during system start-up and are not intended to be error indicators, but
in some cases a system could hang at one of the checkpoints. The most
appropriate action is included with each checkpoint.
6.7.5.1 RS/6000 43P 7043 Model 150 Firmware Checkpoints
The firmware for the Model 150 uses progress codes (checkpoints) in the
range of E1xx to EFFF. The Exxx-Codes are documented in the
RS/6000
7043 43P Series Service Guide, SA38-0512.
6.7.5.2 RS/6000 43P 7043 Model 260 Firmware Checkpoints
The firmware for the Model 260 uses progress codes (checkpoints) in the
range of E1xx to EFFF. The Exxx-Codes for the Model 260 are documented in
the
RS/6000 7043 Model 260 Service Guide, SA38-0554.