IBM DS6000 - Manual (Page 182)

158 IBM System Storage DS6000 Series: Copy Services with IBM System z
14.3.1 Metro Mirror management with ICKDSF
Table 14-2 lists the Metro Mirror commands available with ICKDSF.
Table 14-2 ICKDSF Metro Mirror commands
All commands have to be addressed to a device that is either online or offline to the system
where the job is submitted. For offline volumes, the ICKDSF job must address the volumes
directly by specifying
UNITADDRESS , as shown in Example 14-13.
Example 14-13 Addressing offline volumes
//DELPTHRV JOB (ACCT),'DEL REVRSE PPRC PATH',
// CLASS=A,MSGCLASS=H
//STEP01 EXEC PGM=ICKDSF
//SYSPRINT DD SYSOUT=*
//SYSIN DD *
PPRCOPY DELPATH -
UNITADDR(3000) -
..................
Online volumes cannot be addressed directly and DD statements with the volume serial
number must be used. This assures access to the volume serial number of the volume,
regardless of the real address of the volume; see Example 14-14.
Example 14-14 Addressing online volumes
//DELPAIR1 JOB (ACCT),'ICKDSF DELPAIR',
// MSGCLASS=X,NOTIFY=&SYSUID,MSGLEVEL=(1,1)
//**************************************
//STEP01 EXEC PGM=ICKDSF
//SYSPRINT DD SYSOUT=*
//VOL1 DD UNIT=3390,VOL=SER=DS6400,DISP=SHR
//SYSIN DD *
PPRCOPY DELPAIR DDNAME(VOL1) PRI(X'0002',AAVCA,X'00') -
SEC(X'0003',AAVCA,X'00') LSS(X'00',X'01')
Command Description
PPRCOPY ESTPATH Establishes Metro Mirror paths between a
primary and secondary LSS
PPRCOPY ESTPAIR Establishes Metro Mirror volume pairs
PPRCOPY DELPATH Deletes Metro Mirror paths between a primary
and secondary LSS
PPRCOPY RECOVER Allows a system to regain control of a volume on
the secondary DS6000
PPRCOPY SUSPEND Puts a Metro Mirror pair in the suspended state
PPRCOPY FREEZE Suspends all Metro Mirror operations at the LSS
level
PPRCOPY RUN Resumes I/O operations after a freeze with
Extended Long Busy
PPRCOPY QUERY Queries the status of Metro Mirror volume pair
and path status