IBM DS6000 - Manual (Page 405)

Chapter 26. Global Mirror examples 381
Figure 26-20 Global Copy creation step 4 - select the copy options
Click Next to proceed with the last step of this wizard.
The Verification panel is displayed; see Figure 26-21. In this panel check all the components
of your Global Copy session configuration, and, if necessary, click
Back to correct any of
them, or click Finish to validate. In Figure 26-20 you may move back to correct the Permit
read access from target.
Figure 26-21 Global Copy creation step 5 - verification
26.9.3 Establish FlashCopy relationships
To create FlashCopy pairs with the DS Storage Manager, you have to work through another
series of steps and GUI panels.