IBM DS6000 - Manual (Page 199)

Chapter 14. Metro Mirror interfaces 175
Figure 14-6 Select path options panel
Next, the verification panel (see Figure 14-7) opens. Here you can verify that everything has
been selected correctly. If so, click
Finish. If not, click Back or Cancel as appropriate.
Figure 14-7 Create paths verification panel
14.6.2 Create Metro Mirror pairs
To establish a Metro Mirror pair from the GUI, you can follow the process below. Figure 14-8
on page 176 shows the Metro Mirror panel where we have selected the Metro Mirror source
Storage complex, Storage unit, the Resource type (LSS), and the LSS. We then select
Create from the Select Action pull-down menu.