1 define global copy paths – IBM DS6000 User Manual
Page 254
230
IBM System Storage DS6000 Series: Copy Services with IBM System z
For the most current list of DS CLI supported environments, refer to the Interoperability Matrix
that is found at the IBM Products site at:
20.4.1 Define Global Copy paths
You can use the following commands to define and manage Global Copy paths.
lsavailpprcport
The
lsavailablepprcport
command displays the Fibre Channel ports, which can be used to
establish Global Copy paths, see Example 20-11.
Example 20-11 lsavilpprcport command
dscli> lsavailpprcport -l -dev IBM.1750-13AAGXA -remotedev IBM.1750-13AAVCA -remotewwnn
500507630EFFFCA0 16:16
Date/Time: June 14, 2005 9:36:35 AM CDT IBM DSCLI Version: 5.0.3.110 DS: IBM.1750-13AAGXA
Local Port Attached Port Type Switch ID Switch Port
===================================================
I0000 I0000 FCP NA NA
I0000 I0100 FCP NA NA
I0100 I0000 FCP NA NA
I0100 I0100 FCP NA NA
lspprcpath
The
lspprcpath
command shows you the defined paths from an LSS. Example 20-12 lists the
paths from LSS 16.
Example 20-12 lspprcpath command
dscli> lspprcpath -dev IBM.1750-13AAGXA 16
Date/Time: June 14, 2005 9:46:31 AM CDT IBM DSCLI Version: 5.0.3.110 DS: IBM.1750-13AAGXA
Src Tgt State SS Port Attached Port
========================================
16 16 Success FF16 I0000 I0000
16 16 Success FF16 I0100 I0100
mkpprcpath
With the
mkpprcpath
command, you can define paths between two LSSs. In Example 20-13,
we establish a path from
1750-13AAGXA
/LSS
16
/I/O port
I0000
to
1750-13AAVCA
/LSS
16
/I/O
port
I0100
.
Example 20-13 mkpprcpath command
dscli> mkpprcpath -dev IBM.1750-13AAGXA -remotedev IBM.1750-13AAVCA -remotewwnn
500507630EFFFCA0 -srclss 16 -tgtlss 16 I0000:I0100
Date/Time: June 14, 2005 10:00:48 AM CDT IBM DSCLI Version: 5.0.3.110 DS: IBM.1750-13AAGXA
CMUC00149I mkpprcpath: Remote Mirror and Copy path 16:16 successfully established.
rmpprcpath
The
rmpprcpath
command removes all paths between two LSSs; see Example 20-14 on