Intel Express 5800/120Ld - Manual (Page 159)

System Cabling A-5
A – Diskette drive connector H – Ultra SCSI interface cable
B – Diskette interface cable I – Optional SCSI removable media devices
C – Diskette drive J – Ultra-160/M SCSI connector (68 pin)
D – IDE connector K – Ultra-160/M SCSI interface cable
E – IDE interface cable L – Four SCSI disk drives
F – IDE CD-ROM drive M – System board
G – Ultra SCSI connector (68 pin)
Figure A-2. Standard System Cable Configuration (Standard Drive Bay)
RAID Configuration
The RAID options available for your system provide your system with the added
security of fault tolerance.
If you order a system with a RAID controller, the system is pre-cabled at the factory
(see "RAID System Cabling Configuration" figures below.)
If you are adding a RAID controller you must install, cable, and configure the
controller. Refer to "Installing a RAID Controller Board" in Chapter 4.