Intel Express 5800/120Ld - Manual (Page 93)

Dissasembly and Reassembly 4-21
Figure 4-16. Front Input Fan
6. Observe the position of the fan and fan power cable as connected to the fan
bracket. Information printed on the fan housing is facing away from the fan
bracket.
7. Remove the two screws securing the fan to the fan bracket. See Figure 4-17.
Figure 4-17. Removing the Front Input Fan
8. Position the replacement fan in the fan bracket so that the printed
information on the fan housing is facing away from the fan bracket. Also,
position the fan so the fan power cables are positioned as shown in Figure
4-17. Secure the fan to the fan bracket with the two screws removed in
Step 7.
9. Position the fan bracket in the system. The information on the fan housing
should face the rear of the system. Tabs on the inside right panel and chassis
mounting panel should match up with slots in the fan bracket.
A
B