Intel Express 5800/120Ld - Manual (Page 62)

3-12 Configuring Your System
Security Menu
Note: Enabling the Supervisor Password field requires
a password for entering Setup. The passwords are not case
sensitive.
Feature
Choices or
Display Only
Description Your Setting
Supervisor
Password is Clear Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by
clearing password jumper on
system board (see System Board
Jumpers in this Chapter).
User Password is Clear Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by
clearing password jumper on
system board (see System Board
Jumpers in this Chapter).
Set Supervisor
Password Press ENTER Supervisor password controls
access to the setup utility.
When the <Enter> key is pressed,
the user is prompted for a
password; press ESC key to
abort. Once set, this can be
disabled by setting it to a null
string, or by clearing password
jumper on system board (refer to
System Board Jumpers in this
chapter).
Set User
Password Press ENTER When the <Enter> key is pressed,
the user is prompted for a
password; press ESC key to
abort. Once set, this can be
disabled by setting it to a null
string, or by clearing password
jumper on system board (refer to
System Board Jumpers in this
chapter).
Password on Boot Disabled
Enabled Disables or enables password
entry on boot.
Diskette Access
Secure Mode
Everyone
Supervisor Controls access to diskette drives.
Power Switch
Mask Masked
Unmasked Determines whether power switch
is masked or unmasked.
Option ROM
Menu Mask Unmasked
Masked Determines whether Option ROM
Menu Mask is masked or
unmasked.
Processor Serial
Number Disabled
Enabled Determines whether Processor
Serial Number feature is enabled
or disabled.