Intel Express 5800/120Ld - Manual (Page 57)

Configuring Your System 3-7
Advanced Submenu
Feature
Choices or
Display Only
Description Your Setting
Installed O/S Other
PnP O/S Select the operating system
installed on your system that
will be used most of the time.
Note: An incorrect setting can
cause some operating systems
to display unexpected
behavior.
Reset Configuration
Data No
Yes Select Yes if you want to clear
the Extended System
Configuration Data (ESCD)
area.
Boot-time Diagnostic
Screen Disabled
Enabled Disables or enables display of
the diagnostic screen during
boot instead of the NEC logo.
The Boot-time diagnostic
screen is automatically
enabled if redirection or
RomPilot is enabled.
RomPilot Support Disabled
Enabled Disables or enables RomPilot
support. The Boot-time
diagnostic screen is enabled if
RomPilot is enabled. (See
Appendix B for more details.)
Memory Reconfiguration Submenu
Feature
Choices or
Display Only
Description Your Setting
DIMM #1 Status Normal* (Display Only)
DIMM #2 Status Normal* (Display Only)
DIMM #3 Status Normal* (Display Only)
DIMM #4 Status Normal* (Display Only)
Clear DIMM Errors Press ENTER Clears the DIMM group error
status information.
DIMM Error Pause Enabled
Disabled The POST operation pauses if
a DIMM error occurs.
*Possible Values: Normal, None, or Error.
CPU Reconfiguration Submenu
Feature
Choices or
Display Only
Description Your Setting
CPU #1 Status Normal* (Display Only)
CPU #2 Status Normal* (Display Only)
Clear CPU Errors Press ENTER Clears the CPU error
information.
CPU Error Pause Enabled
Disabled The POST operation pauses if
a CPU error occurs.
*Possible Values: Normal, None, or Error.