Inter-Tel 8622 - Manual (Page 3)

1
Q
UICK
R
EFERENCE
G
UIDE FOR
F
REQUENTLY
U
SED
F
EATURES
This guide provides basic instructions for frequently used system features. Refer
to the user guide for more information on these and other features.
P
LACING AN
E
MERGENCY
C
ALL
Dial ( / Eur.) to place an emergency call. You do
not have to select an outside line first.
If your endpoint is locked, you can still use it to dial emergency service num-
bers. Press
after dialing the emergency service number to immediately place
the call ( ). Otherwise, there will be a 4-second system pause
before the system places the call. Refer to Locking Your Endpoint in the
Advanced Features section of the user guide for more information.
P LACING AN I NTERCOM C ALL
With or without the handset lifted, dial the subscriber’s extension number. When
using Auto Answer, speak when the intercom (IC) confirmation appears.
P LACING AN O UTSIDE C ALL
1. With or without the handset lifted, do one of the following:
• Press .
• Enter the Outgoing Call access code. The default code is .
2. Dial the number. If you enter an incorrect digit, press to move
the cursor backward, deleting the last digit(s) entered.
A
NSWERING A
C
ALL
To answer a call, do one of the following:
• Lift the handset.
• Press
.
• Press .
• Press .
To answer a waiting call, either end your current call or place it on hold. Then
answer the call as described above.
IMPORTANT
Before using your endpoint, contact your system administrator
to make sure your system is correctly configured for emer-
gency service.
9 1 1 9 9 9 1 1 2
#
9 1 1 #
OUTGOING
9
MUTE
LINE
ANSWER
© Inter-Tel (Delaware), Inc. October 2006 printed in U.S. Part no. 835.3065