Inter-Tel 8622 - Manual (Page 38)

24
Inter-Tel ® Model 8622 Endpoint User Guide
BASIC
FEATURES
Placing Conference Calls
You can place a conference call with subscribers and outside parties. The number of
parties who can be added to the conference depends on system configuration.
To place a conference call:
1. While on the first call, press or to place the call on hold.
2. Add the conference parties:
If you are adding subscribers:
a. Dial the extension number and announce the conference.
b. Press the flashing button or to add the party to the
conference.
If you are adding outside parties:
a. Press or the Outgoing Call access code ( ).
b. Dial the number, and then announce the conference.
c. Press the flashing button or to add the party to the
conference.
3. After gathering the conference parties, press the flashing button or
to start the conference. A confirmation notice displays.
To place your endpoint on hold and remove yourself from the conference:
Press
. This places your endpoint on hold without disconnecting the parties. To
return to the conference, press the flashing button.
To add a party to the conference:
1. Press or . This leaves the conference parties connected.
2. Call the party to be added to the conference, announce the conference, and then
press the flashing
button or .
3. Press the flashing button or to reconnect to the conference
with the added party.
To drop out of the conference: Press , and then hang up. This removes you
from the conference, but leaves the other parties connected.
To reconnect to the conference after dropping out: Lift the handset, and then press
the flashing
button. (Press the flashing button twice for handsfree
calls.)
CONF 5 5
CONF 5 5
OUTGOING 9
CONF 5 5
CONF
5 5
CNF IN PROGRESS
LINE
CONF 5 5
CONF 5 5
CONF 5 5
CONF
CONF CONF