Inter-Tel 8622 - Manual (Page 48)

34
Inter-Tel ® Model 8622 Endpoint User Guide
AD
VANC
ED
FEATUR
ES
Using Group Listen
Group Listen allows you and others to listen to a caller over the speaker while you use
the handset or headset to continue speaking. This allows other people in the room to
listen to the caller while the caller can hear you only. Because Group Listen uses the
external speaker, it cannot be used during a handsfree call.
To enable Group Listen during a call, do one of the following:
• Press (Group Listen on).
• Press (Group Listen on/off).
To disable Group Listen, do one of the following:
• Press (Group Listen off).
• Press (Group Listen on/off).
• Hang up.
Using Monitor Account
Monitor Account allows you to assign feature buttons to other subscribers using Inter-
Tel Personal Communicator for Web.
* When enabled, you can use your Monitor
Account buttons to:
•
Call the subscriber by pressing the button assigned to the extension.
• Transfer a call to the subscriber by pressing the button (you do not have to dial
the extension number).
• Monitor the subscriber’s call activity.
The assigned feature button lamp indicates the subscriber’s call activity, as shown in
the following table.
4 9 1
4 9 2
4 9 0
4 9 2
* Monitor Account may or may not be enabled for your system. Refer to the Help section provided in Inter-
Tel Personal Communicator for Web for instructions to enable Monitor Account feature buttons. Contact
your system administrator for more information.
LAMP INDICATION SUBSCRIBER ENDPOINT ACTIVITY
Off All of the subscriber’s endpoints are idle.
On One or more of the subscriber’s endpoints are busy.
Blinking Rapidly One or more of the subscriber’s endpoints are ringing.
Blinking Slowly
The subscriber is not currently available for calls (as
specified by the subscriber’s current status).
TIP
You can monitor your own account. The blinking feature button lamp
will help to remind you to change your status from unavailable for calls
to available after you have been away from your desk.