JVC ENLPT0736-001B - Manual (Page 100)

Filename [HM-HDS4EX_07Sub.fm]
Masterpage:Left
100
EN
Page 100 April 2, 2003 3:11 pm
TROUBLESHOOTING (cont.)
ON-SCREEN MESSAGES (cont.)
MESSAGE DESCRIPTION
PROGRAMME NOT COMPLETED
PROGRAMME OVERLAPPED
PLEASE CONFIRM AND MODIFY The timer programme you set is overlapping with another
timer programme. (
੬
pg. 50)
TIMER PROGRAMMING STOPPED Appears when you stop setting timer programme.
PROGRAMME COMPLETED
PRESS “OK” THEN [
#
] TO ENTER TIMER STANDBY
MODE
Timer programming is completed properly.
TIMER RECORDING WILL START WITHIN 5 MIN
INSERT CASSETTE AND PRESS [
#
]
The recorder is not in the timer-standby mode. The timer
recording will start in about 5 minutes.
REMAINING CAPACITY IS SMALL
DELETE UNWANTED PROGRAMME FROM HDD The remaining capacity of the hard disk drive is in short
for the current recording. (
੬
pg. 58)
CAPACITY IS FULL, RECORDING STOPPED The recording stopped due to the shortage of the free
space on the hard disk drive.
CAPACITY IS FULL, UNABLE TO RECORD
DELETE UNWANTED PROGRAMME FROM HDD The recording cannot be started due to the shortage of the
free space on the hard disk drive. (
੬
pg. 58)
TITLE MEMORY IS FULL, UNABLE TO RECORD
DELETE UNWANTED PROGRAMME FROM HDD The remaining capacity is full for registration for the
Navigation system. The recording cannot be started even
though the capacity for the recording is enough.
(
੬
pg. 58)
COPY PROHIBITED, UNABLE TO RECORD ON HDD It is not possible to record a copy-protected programme.
NO PROGRAMME TO PLAYBACK There is no recorded programme on the hard disk drive.
UNABLE TO GO BACK ANYMORE It is not possible to go back beyond the start point of the
recording for Live Memory Playback. (
੬
pg. 29)
DUBBING COMPLETED Appears when Easy Dubbing is completed. (
੬
pg. 63)
DUBBING STOPPED Appears when Easy Dubbing is stopped. (
੬
pg. 63)
TAPE ENDED, DUBBING STOPPED Appears when the tape ends during Easy Dubbing.
(
੬
pg. 63)
COPY PROHIBITED It is not possible to dub a copy-protected programme.
IMPOSSIBLE DURING DV DUBBING OR RECORDING
IN DV MODE When input mode is set to “D-1” or during recording in
the recording speed of DV, other operations such as
playback of another programme, etc. are not possible.
CAN NOT SELECT PROGRAMME RECORDED IN DV
MODE During recording, you cannot playback another
programme recorded in the recording speed of DV.
CAN NOT SELECT PROGRAMME RECORDED OTHER
THAN IN DV MODE When you create a play list, you cannot include scenes
recorded in the recording speed of DV and scenes
recorded in another mode in the same play list.
HM-HDS4EX.book Page 100 Wednesday, April 2, 2003 3:55 PM