Scan for beginning of programme (or play list) – JVC ENLPT0736-001B User Manual

Page 25

Advertising
background image

Masterpage:Right-NoTitle0

EN

25

Filename [HM-HDS4EX_04Basic.fm]

Page 25

April 2, 2003 2:20 pm

Scan for Beginning of Programme (or
Play List)

You can scan the beginning of the programme (or play list) easily
with the HDD Navigation. For details of the play list, refer to

“Play List Features” (

pg. 60).

A

Turn on the recorder.

Press 1.

B

Select the HDD deck.

Press HDD.

C

Access the Index screen.

On the recorder
Press NAVIGATION.

On the remote control

A Press NAVIGATION. The HDD Navigation screen

appears.

B Press

w

e

to move the arrow to “REC LIST”, then press

OK.

● When you wish to play back a play list, select “PLAY LIST”,

then press OK.

D

Select the programme.

● When you wish to play back a programme during recording

from the beginning, press

w r

e

t

to move the arrow to the

top left corner index of the recording programme.

E

Start playback.

Press

w

e

to move the arrow to “BEGINNING”, then

press OK again.

● To repeat playback of a selected programme (or play list), refer

to “Repeat Playback” (

pg. 32).

F

Pause playback.

Press 9.

● To resume normal playback, press 4.

G

Stop playback.

Press 8.

● To resume playback from the point where playback was

previously stopped, press

w

e

to move the arrow to

“RESUME”, then press OK.

● Turn on the TV and select the AV mode.

● Slide TV/CABLE/SAT switch to the right.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to
show pictures on the screen.

?

On the recorder
Turn the JOG dial to select
the programme (or play list),
then press the JOG dial.

On the remote control
Press

w r

e

t

to move the

arrow on the index (small
still pictures) of the desired
programme, then press OK.

HM-HDS4EX.book Page 25 Wednesday, April 2, 2003 3:55 PM

Advertising
This manual is related to the following products: