JVC ENLPT0736-001B - Manual (Page 9)

Masterpage:Right-NoTitle0
EN
9
Filename [HM-HDS4EX_03Names.fm]
Page 9 April 7, 2003 2:46 pm
ON-SCREEN DISPLAY (for HDD deck)
When “O.S.D.” is set to “ON” (
੬
pg. 84), various operational information appear on the TV screen.
ON-SCREEN DISPLAY (for DV dubbing)
When “O.S.D.” is set to “ON” (
੬
pg. 84), various operational information appear on the TV screen.
You can show or clear the following operational information by pressing . Each time you press , the information
appears and disappears alternately.
When pressing MODE ( )
(Appears for eight seconds.)
A HDD capacity graph
(Six conditions (full, 60 hours or less open,
40 hours or less open, 20 hours or less
open, 10 hours or less open, empty) is
displayed in SEP mode.)
B Current recording speed
C Remaining HDD time for each recording
speed
D Recording speed
When pressing 7 during recording A Recording time for Instant Timer Recording
(ITR) mode*
* When “d-1” is selected as an input source, this ITR
display does not appear on the TV screen.
When capturing images from the external DV equipment
A Recording speed
B HDD capacity graph
C HDD time counter
D Recording time scale
E HDD mode
F Remote control mode
G Connected DV equipment mode
H Connected DV equipment model information
I Input channel
J Sound mode
K Sound input bit-rate*
* Indicates the sound bit-rate of the connected DV equipment
L Connected DV equipment information*
* Maker name and model name, etc. may not appear depending on
the connected equipment.
M Time counter for the connected DV equipment
N Sound monitor mode
O Remote control switch
P Auto capture button
Q Sound monitor switch
R Sound bit-rate*
* Set in DV AUDIO REC setting
S Elapsed recording time
HM-HDS4EX_03Names.fm Page 9 Monday, April 7, 2003 2:46 PM