JVC ENLPT0736-001B - Manual (Page 93)

Masterpage:Right-NoTitle0
EN
93
Filename [HM-HDS4EX_07Sub.fm]
Page 93 April 2, 2003 3:11 pm
Fine-Tuning Channels Already Stored
A
Select the channel to fine-tune.
Press
w r e t
until the channel you want to tune begins
blinking.
B
Access the Manual Channel Set screen.
Press OK twice. The Manual Channel Set screen appears.
C
Perform tuning.
Press
e
until “+/–” begins blinking, then press
rt
until
the picture is its clearest. Then press OK.
● The Confirmation screen appears.
● Repeat steps A – C as necessary.
D
Close the Confirmation screen.
Press MENU.
When Receiving A Scrambled
Broadcast
A
Select the decoder mode.
Set “L-2 SELECT” to “DECODER” (
੬
pg. 69).
B
Access the Confirmation screen.
Perform steps A and C of “Manual Channel Set” on
page 90.
C
Select the position.
Press
w r e t
to select the channel position
broadcasting scrambled programmes, then press OK
twice.
D
Change the decoder setting.
Press
e
until “OFF” (decoder setting) begins blinking,
and set it to “ON” by pressing
rt
.
E
Return to the Confirmation screen.
Press OK.
● Repeat steps C – E as necessary.
F
Close the Confirmation screen.
Press MENU.
Perform steps A and C of “Manual Channel Set” on page 90
to access the Confirmation screen before continuing.
INFORMATION
If you live in Eastern Europe, “TV SYSTEM” setting appears
instead of “DECODER” setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcasted as follows.
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step E on page 88.
B Press
e until the TV system (D/K or B/G) blinking on the
Manual Channel Set screen in step E on page 90.
C Press
rt to select appropriate TV System (D/K or B/G).
HM-HDS4EX.book Page 93 Wednesday, April 2, 2003 3:55 PM