JVC ENLPT0736-001B - Manual (Page 14)

Filename [HM-HDS4EX_04Basic.fm]
Masterpage:Left
14
EN
Page 14 April 2, 2003 2:20 pm
INITIAL SETTINGS
Auto Set Up
Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
A
Turn on the recorder.
Press
1
on the recorder or remote control. The Country
Set display appears on the TV screen.
B
Select your country.
NOTES:
● If you have selected BELGIUM or SUISSE, go to step C.
● If you have selected MAGYARORSZÁG, CESKÁ REPUBLIKA,
POLSKA or OTHER EASTERN EUROPE, press OK. The Clock
Set screen appears. Set the clock manually (
੬
pg. 86), then
go to step D.
● If you have selected any other country name, press OK and go
to step D.
After the 1 button on the recorder or remote control is
pressed for the first time to power on the recorder, by simply
selecting your country*, the Auto Set Up function sets the
tuner channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic (CESKÁ
REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe
(OTHER EASTERN EUROPE), set the clock manually.
Slide TV/CABLE/SAT switch to the right.
?
Before starting, make sure of the following:
● The TV aerial cable should be connected to the recorder.
● The recorder’s mains power cord should be connected to a
mains outlet.
● The TV should be set to its AV mode.
NOTE:
For a few seconds after you
pressed
1 , you can not stop
Auto Set Up, even if you press
MENU to cancel this procedure.
Press
rt
to move the
highlight bar (pointer) to your
country’s name.
(Example) DEUTSCHLAND is
selected.
HM-HDS4EX.book Page 14 Wednesday, April 2, 2003 3:55 PM