JVC ENLPT0736-001B - Manual (Page 65)

Masterpage:Right-NoTitle0
EN
65
Filename [HM-HDS4EX_05Timer.fm]
Page 65 April 2, 2003 3:53 pm
Normal Dubbing
(from HDD to VHS)
You can dub selected scenes from the HDD deck to a cassette,
starting and stopping wherever you wish.
A
Load a cassette.
Insert a cassette with the record safety tab intact.
B
Prepare the HDD deck for dubbing.
A Slide TV/CABLE/SAT to the right, then press HDD and
select the programme to be dubbed. You can select the
programme by HDD Navigation. (
੬
pg. 24)
B Press VCR PR+/– to set the channel other than “DUB”.
C
Locate the start point.
A Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
B Press
3
a little, then press
4
to start playback.
C Press
9
to pause playback a little before the start
point.
D
Prepare the VHS deck for dubbing.
A Press S-VHS.
B Press VCR PR+/– to set the channel “DUB”.
C Press MODE to select tape speed.
D Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
E
Start dubbing.
A Press HDD and
4
to start playback.
B Press S-VHS and
7
(
7
and
4
on the remote control)
to start dubbing.
F
End dubbing.
Press
8
. Then press HDD and press
8
.
NOTES:
● There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing
is not recorded.
?
HM-HDS4EX.book Page 65 Wednesday, April 2, 2003 3:55 PM