John Deere AUTOTRAC OMPFP11320 - Manual (Page 29)

GS2 Display 1800
BA31779,000024B -19-01AUG11-3/23
BA31779,000024B -19-01AUG11-4/23
BA31779,000024B -19-01AUG11-5/23
BA31779,000024B -19-01AUG11-6/23
Continued on next page BA31779,000024B -19-01AUG11-7/23
Select the Settings button. This will give the operator the
option to increase or decrease the steering sensitivity and
Direction Toggle button.
Direction Toggle button can be used to change the
direction of the vehicle on the map if it is different than the
direction the machine is traveling.
PC13959 —UN—01AUG11
Settings
PC10857LB —UN—14APR09
Increase AutoTrac Steering Sensitivity
PC10857LC —UN—14APR09
Decrease AutoTrac Steering Sensitivity
PC13960 —UN—01AUG11
Direction Toggle
Recording ON/OFF – Turns coverage recording ON and
OFF when Manual recording source is selected. PC10857LD —UN—14APR09
Recording ON/OFF
ShiftTrack – Go to the following Shift Track Controls.
Shift Track is used to adjust position of machine left,
center, or right of the set track. Shift track can be used to
compensate for GPS drift. Drift is inherent to any satellite
based, differentially corrected GPS system. PC10857NC —UN—24SEP09
ShiftTrack
Shift Track Left PC10857LE —UN—14APR09
Shift Track Left
Shift Track Right PC10857LF —UN—14APR09
Shift Track Right
30-3 090811
PN=29