Reactivating autotrac on next pass, Autotrac status pie – John Deere AUTOTRAC OMPFP11320 User Manual

Page 33

Advertising
background image

GS2 Display 1800

CF86321,0000392 -19-01JUN11-1/4

CF86321,0000392 -19-01JUN11-2/4

CF86321,0000392 -19-01JUN11-3/4

CF86321,0000392 -19-01JUN11-4/4

AutoTrac Status Pie

The AutoTrac Status Pie is shown at the bottom of the
Run Page as a quick diagnostic indicator.

INSTALLED (1/4 of pie)—AutoTrac Steering Controller
and all other necessary hardware are installed.

PC8832 —UN—25OCT05

Installed

CONFIGURED (2/4 of pie)—Valid AutoTrac Activation,
Tracking Mode has been determined and a valid Track
0 has been established. Correct StarFire signal level
for AutoTrac Activation is selected (SF1, SF2, or RTK).
Vehicle conditions met.

PC8833 —UN—25OCT05

Configured

ENABLED (3/4 of pie)—Steer On/Off softkey has been
selected.

PC8834 —UN—25OCT05

Enabled

ACTIVATED (4/4 of pie with “A”)—Resume switch is
pressed and AutoTrac is steering the vehicle.

PC8835 —UN—25OCT05

Activated

30-7

090811

PN=33

Advertising