Juniper Networks IDP SERIES IDP250 - Manual (Page 16)

• High Availability Interface Port on page 6
• Traffic Interface Ports on page 7
• IDP250 Technical Specifications on page 59
Power Supply
The appliance has one power supply. It is a field replaceable unit (FRU). You can order
a replacement part through your Juniper Networks sales contact. The part number for
the IDP250 power supply FRU is UNIV-PS-300W-AC.
You can also order a power cord. The part number for the power cord is
CBL-JX-PWR-Country (varies by country).
Related
Documentation
Replacing a Power Supply on page 53 •
Hard Drive
The appliance has one 80 GB hard drive. It is not a field replaceable unit (FRU).
Fans
When the system is cool, appliance fans spin at a slower speed to reduce noise and save
energy. As the system heats up, the fans run at a faster speed. In the event of fan failure,
the appliance fault LED blinks and the remaining fan or fans run at full speed until the
failed fan is replaced.
The fans for this model are not field replaceable units (FRUs).
System Status LEDs
Table 6 on page 4 describes system status LED states.
Table 6: System Status LED States
Description Status LED
System is powered on. Solid green Power
System is powered off. Off
Hard disk is active. Flashing amber Hard Drives
Hard drive has no activity. Off
Copyright © 2012, Juniper Networks, Inc. 4
IDP250 Installation Guide