Juniper Networks IDP SERIES IDP250 User Manual
Page 62
To push the software image from the NSM GUI server to IDP Series devices:
1.
From the NSM main menu, select
Devices > Software > Install Device Software
to
display the Install Device Software dialog box.
2.
From the Select OS Name list, select
ScreenOS/IDP
.
3.
From the Select Software Image list, select the image file you just added to the NSM
GUI server.
4.
In the Select Devices list, select the IDP Series devices on which to install the software
update.
5.
Click
Next
and complete the wizard steps.
6.
Select
Automate ADM Transformation
to automatically update the Abstract Data
Model (ADM) for the device after NSM installs the update.
NOTE:
If you clear this setting, the update is installed onto the device, but
you cannot manage the device from NSM until the device ADM is updated.
7.
Click
Finish
to display upgrade status in the Job Information dialog box.
8.
When the upgrade finishes, click
Close
to exit the Job Information dialog box.
9.
In the NSM Device Manager, right-click the IDP Series device and select
Import Device
.
The software upgrade is complete.
Next Steps:
Check to see if J-Security Center has released an update for the detector engine or
attack database:
1.
From the NSM main menu, select
Tools > View/Update NSM attack database
and
complete the wizard steps.
2.
Push the updated IDP detector engine to IDP Series devices:
From the NSM main menu, select
Devices > IDP Detector Engine > Load IDP Detector
Engine for ScreenOS
and complete the wizard steps.
NOTE:
Updating the IDP detector engine on a device does not require a
reboot of the device.
Copyright © 2012, Juniper Networks, Inc.
50
IDP250 Installation Guide