Juniper Networks IDP SERIES IDP250 User Manual
Page 44
To install the permanent license key:
1.
Open a Web browser and navigate to the Juniper Networks License Management
System Tool (LMS tool):
2.
Authenticate with your Juniper Networks customer username and password.
3.
Use the LMS tool to generate a new license.
You must provide the device serial number. You can locate the serial number in the
following ways:
•
In ACM, the serial number is displayed in the lower-left hand corner of the home
page.
•
From the CLI, run the scio getsystem command to display system information,
including the serial number.
Save the license as a text file named lic.txt.
4.
Connect to the IDP OS command-line interface:
•
Use SSH to connect to the IP address or hostname for the management interface.
Log in as admin and enter su – to switch to root.
•
If you prefer, make a connection through the serial port and log in as root.
5.
Use SCP or FTP to copy the license file to the IDP Series appliance. The IDP Series
appliance does not run an FTP server, so you have to initiate the FTP session from the
IDP Series appliance.
6.
Change directory to the temporary directory:
[root@localhost ~]
cd /tmp
7.
Change permissions on the file to enable read, write, and execute:
[root@localhost ~]
chmod 777 lic.txt
8.
Run the following scio command to add the license key:
[root@localhost ~]
scio lic add lic.txt
9.
Run the following scio command to verify you have successfully added the license
key:
[root@localhost ~]
scio lic list
[root@localhost ~]# scio lic list
ID Machine ID Issue Date Expiration OK
Feature
-- ---------------- ------------------------ ------------------------ -------
-------------------
1 Upgrade Tue Apr 25 00:00:00 2006 Sat Apr 25 00:00:00 2009 Y
idp_key
[root@localhost ~]#
Related
Documentation
•
Copyright © 2012, Juniper Networks, Inc.
32
IDP250 Installation Guide