Sharp Digital Laser Copier/Printer AR-5127 - Manual (Page 16)

AR-5127 EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 1
[6] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. External view
2. Internal
No. Name Function/Operation
1 Platen cover Place the original on the original table and close the platen cover before copying starts.
2 Paper output tray Finished copies are deposited in the paper output tray.
3 Front cover Open to remove misfeeds and for copier servicing.
4 Paper trays Each tray holds 500 sheets of copy paper.
5 Power switch Press to turn copier power on and off.
6 Handles Use to move the copier.
7 Operation panel All copier controls are located here for easy operation.
8 Original table Place the document to be copied here.
9 Upper exit area cover Open to remove misfeeds when an optional job separator tray kit or finisher is installed.
10 Side cover Open to remove misfeeds.
11 Side cover handle Lift and pull to open the side cover.
12 Bypass tray guides Adjust to the width of the copy paper.
13 Bypass tray Special papers (including transparency film) and copy paper can be fed from the bypass tray.
14 Bypass tray extension Pull out when feeding large paper such as 8-1/2" x 14" and 11" x 17".
1
2
3
4
5
6
7
8 9
10
13
14
11
12
No. Name Function/Operation
1 Toner cartridge lock release lever Use to unlock the toner cartridge.
2 Toner cartridge Contains toner.
3 Paper guide Open to remove misfed paper.
4 Fusing unit release levers Lower to remove misfed paper.
5 Photoconductor drum A drum on which photoconductor is coated. Images are formed on this photoconductor drum.
6 Roller rotating knob Turn to remove misfed paper.
1
2
5
3
4
6