Sharp Digital Laser Copier/Printer AR-5127 - Manual (Page 17)

AR-5127 EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 2
3. Operation panel
A. Key position
B. LCD panel
(Basic screen)
No. Name Function/Operation
1 COPY key and indicator Press to select the COPY mode.
Press and hold during standby to display the total output count. Quantity of toner remaining is also displayed.
2 Display Displays information to assist the operator.
3 BACK key Press to return the display to the previous screen.
4 Information key Press to display the detailed description when [i] is displayed at the upper right of the display.
5 JOB STATUS key Press to check the settings of selected functions or the status of reserved output jobs.
6 OK key Press to register the selected setting.
7 Copy quantity display Displays the specified copy quantity during the ready condition and displays the copy countdown as copies are
made.
8 Numeric keys Used to select the desired copy quantity.
9 INTERRUPT key and
indicator Interrupts a copy run.
10 CLEAR ALL key Clears all selected settings and returns the copier to the initial settings.
11 START key and indicator Copying is possible when the indicator is on.
Press to start copying.
12 EXPOSURE key Used to select the exposure modes: AUTO, TEXT, TEXT/PHOTO, PHOTO or SUPER PHOTO.
13 PAPER SELECT key Used to manually select a paper tray.
14 COPY RATIO key Press to select a reduction or enlargement copy ratio.
15 AUTO IMAGE key Press for automatic copy ratio selection.
16 2-SIDED COPY key Press to select the 1-sided to 1-sided, 1-sided to 2-sided, 2-sided to 1-sided* or 2-sided to 2-sided* copy mode.
*To select the 2-sided to 1-sided or 2-sided to 2-sided copy mode, an optional RSPF must be installed.
17 OUTPUT key Press to select the sort, group or staple sort* mode.
*To select the staple sort mode, an optional finisher must be installed.
18 SPECIAL FUNCTION key Press to select special functions.
19 Arrow keys Press to move the highlighted item in the display.
20 AUDIT CLEAR key Press to close an open account.
21 Zero key Use as part of numeric keys to enter copy quantity.
Press during a continuous copy run to display the number of copies completed in the current run.
22 PROGRAM/READ END
key Press to select the job memory mode.
Press to finish scanning of originals and to start copying when copying from the original table.
23 CLEAR key Press to clear the copy quantity display or press during a copy run to terminate copying.
These keys and indicators are not used
for the copier features
1
12 13 14 15 16 17 18 19 20 21 22 23
2 3 4 5 6 7 8 9 10 11
4
2 3 1
5 6
No. Name Function/Operation
1 Exposure display Indicates the selected exposure mode.
2 Message display Messages are displayed regarding
copier status and operation.
3 Original size display The original paper size is displayed.
4 Copy ratio display Displays the copy ratios for reductions
or enlargements.
5 Paper size display Displays the selected paper size.
When "AUTO" is displayed, paper size
matching the original and copy ratio
will be automatically selected.
6 Paper tray display The selected paper feed location is
highlighted.