Sharp Digital Laser Copier/Printer AR-5127 - Manual (Page 51)

AR-5127 SIMULATION 8 - 23
Operation/procedure
Input the set value with the 10-key and press the [OK] key.
Operation/procedure
Current memory is displayed in PRESENT column.
Enter a value (max. 8 digits) with the 10-key, and press the [OK] key.
The input number is displayed instead of "NEW".
The set value is stored and "PRESENT" of LCD is revised.
Operation/procedure
The operating conditions of sensors and detectors in the different sec-
tions than the paper feed section of the machine are displayed. The
active sensors and detectors are highlighted.
Operation/procedure
The operating conditions of sensors and detectors in the paper feed
section of the machine are displayed. The active sensors and detec-
tors are highlighted.
Width detection size of the manual feed tray (one of them is displayed.)
A4/A3, LT/WLT, B5/B4, INV/LTR, A5/A4R, B5R, POSTCARD, EXTRA
(At detection, highlighted)
Display
items
Content
Setting
range
Default
JAPAN,
SEC, SECL,
SUK, SCA
Others
0:ON
Effective (The
message with FAX
uninstalled is
displayed.) 0-1 0 1
1:OFF
Disable (Error Beep)
27
27-1
Purpose Setting
Function
(Purpose) Used to set PC/MODEM communication trouble (U7-
00) detection Yes/No.
Section Communication (RIC/MODEM)
Item Specifications Operation mode
(Common)
Display
items
Content
Setting
range
Default
0:OFF
In case of the communication
trouble, U7-00 is not displayed. 0-1 0
1:ON In case of the communication
trouble, U7-00 is displayed.
27-5
Purpose Setting
Function
(Purpose) Used to enter the TAG No. of the copier.
Item Data
30
30-1
Purpose Operation test/check
Function
(Purpose) Used to check the operation of sensors and detectors
in the sections other than the paper feed section of the
copier and the related circuit. (The operation of
sensors and detectors can be monitored with the
LCD.)
Section Others
Item Operation
Sim27-1 U7-00 SET.
DISABLE U7-00 0
(0:OFF 1:ON)
[ 0- 1] 0
Sim 27-5 TAG# SET.
TAG# SETTING
PRESENT :
NEW : 12345678
PPD1H
PS paper detection 1 sensor
PPD1L
PS paper detection 2 sensor
PPD2
Duplex sensor
POD1 1st paper exit paper out sensor
DVCH Developing cartridge detection sensor
DRST Drum initial detection sensor
DSWR1 Interlock switch (side door)
SFTHP Shifter home position sensor
POD2
2nd paper exit paper out sensor
TOPF 2nd paper exit full detection sensor
DSWR0 2nd paper exit cover open/close detection sensor
LOEMP 1st paper exit empty detection sensor
30-2
Purpose Operation test/check
Function
(Purpose) Used to check the operation of sensors and detectors
in the paper feed section and the related circuits. (The
operations of sensors and detectors in the paper feed
section can be monitored with the LCD.)
Section Paper feed
Item Operation
PED1 1st cassette paper empty sensor
LUD1 1st cassette paper upper limit detection sensor
CD1 1st cassette empty sensor
PED2 2nd cassette paper empty sensor
LUD2
2nd cassette paper upper limit detection sensor
CD2
2nd cassette empty sensor
PFD2 2nd cassette paper pass sensor
DSWR2 2nd cassette right door detection sensor
MPED Manual tray paper empty detection
MPLS1
Manual tray length detection 1
MPLS2
Manual tray length detection 2
MPLD1
Manual feed paper length detection 1
MPLD2 Manual feed paper length detection 2
Sim30-1 MAIN SENSOR
PPD1H PPD1L PPD2
POD1 DVCH DRST
DSWR1 SFTHP POD2
TOPF DSWR0 LOEMP
Sim30-2 TRAY SEN1/2
PED1 LUD1 CD1
PED2 LUD2 CD2 PFD2
DSWR2
MPED