Sharp Digital Laser Copier/Printer AR-5127 User Manual
Page 40
AR-5127 SIMULATION 8 - 12
*1. The negative value of the set value corresponds to the grid high
output voltage.
*2. The set values can be selected from the above 8 patterns only.
*3. The selected pattern determines the grid high voltage and the grid
low voltage.
If, for example, the grid high voltage is set to –480V (pattern 1), the
grid low voltage is –350V.
Operation/procedure
Enter the adjustment value and press the [OK] key, and output opera-
tion is performed for 30sec.
*1. The negative value of the set value corresponds to the grid high
output voltage.
*2. The set values can be selected from the above 8 patterns only.
*3. The selected pattern determines the grid high voltage and the grid
low voltage.
If, for example, the grid high voltage is set to –480V (pattern 1), the
grid low voltage is –350V.
Operation/procedure
Select with the 10-key and operate for 30 seconds.
Operation/procedure
Set the rotation speed of the duplex motor.
Operation/procedure
Set the switch back time of the duplex motor.
Operation/procedure
Press the [OK] key and operate the toner motor for 30 sec.
Pressing the [INTERRUPT] key interrupts the operation, and the dis-
play returns to the main code entry screen.
NO.
Set value
Grid High
Grid Low
1 480
–480V
–350V
2 505
–505V
–375V
3
530
–530V
–400V
4
555
–555V
–425V
5
580
–580V
–450V
6 605
–605V
–475V
7 630
–630V
–500V
8 655 –655V
–525V
8-15
Purpose
Adjustment/Operation test/check
Function
(Purpose)
Used to check and adjust the operation of the main
charger grid voltage (low mode) in FAX mode and the
control circuit.
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Photo conductor
(Initial screen)
(Executing screen)
Setting range
1-8
Default
5
NO.
Set value
Grid High
Grid Low
1 480
–480V
–350V
2 505
–505V
–375V
3
530
–530V
–400V
4
555
–555V
–425V
5
580
–580V
–450V
6 605
–605V
–475V
7 630
–630V
–500V
8 655 –655V
–525V
9
9-1
Purpose
Operation test/check
Function
(Purpose)
Used to check and adjust the operation of the load
(motor) in the duplex section and the control circuit.
Section
Duplex
Item
Operation
Sim8-15 MHV(L) FAX
FAX 5
EXEC [ 1- 8]
5
Sim8-15 MHV(L) FAX
FAX 5
EXEC
[ 1- 8]
5
(Initial screen)
(Executing screen)
1:DMF600
Duplex motor forward rotation (600dpi)
2:DMF1200
Duplex motor forward rotation (1200dpi)
Disabled
3:DMR600
Duplex motor reverse rotation (600dpi)
4:DMR1200
Duplex motor reverse rotation (1200dpi)
Disabled
9-4
Purpose
Operation test/check
Function
(Purpose)
Used to adjust the rotation speed of the duplex motor.
Section
Duplex
Item
Operation
Setting range 1-13
Default
3
9-5
Purpose
Adjustment
Function
(Purpose)
Used to adjust the switch back time of the duplex
motor.
(Initial screen)
(Input screen)
Display items
Installation range
Default
1:600dpi
18-76
50
2:1200dpi
Disabled
10
10-0
Purpose
Operation test/check
Function
(Purpose)
Used to check the operation of the toner motor and its
control circuit.
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Developer/Toner hopper
Item
Operation
Sim9-1 MOTOR CHECK
1:DMF600 4:DMR1200
2:DMF1200
3:DMR600
EXEC
2
Sim9-1 MOTOR CHECK
1:DMF600 4:DMR1200
2:
DMF1200
3:DMR600
EXEC
2
Sim9-4 MOTOR SPEED
MOTOR SPEED 3
[ 1- 13]
3
Sim9-5 SW BACK TIME
1:600dpi 50
2:1200dpi 50
1
Sim9-5 SW BACK TIME
1:600dpi 50
[ 18- 76]
50